NOTE: If you have followed the recommendation in
step 3, you should now mount the horizontal fin to
the fuse.
FUSELAGE
NOTE: Correct order of placement is (5) rear
spreader; (2) rear wing mount; (3) two servo
holders; (4) two battery holders; (1) front wing
mount. See the plate in Step 3 for an image of the
correct order before beginning.
NOTE: Correct order of placement is (5) rear
spreader; (2) rear wing mount; (3) two servo
holders; (4) two battery holders; (1) front wing
mount.
BUILD NOTE: These part numbers are noted on the
parts tree.
NOTE: Many have recommended installing the battery
mounts (the two #4 pieces) upside down, reasoning
that with the wide varieties of batteries available
(including the highly recommended
KAN 1050
7-cell) it is better to use the modified
upwards-facing prongs for rubberbands than try to
fit an odd-sized battery within the prongs.
NOTE: Ensure the wheel spins freely before securing
- it may be necessary to ream the wheel hub a bit.
Further,
many have recommended replacing the stock SS
wheels with spoked Light-Flyer wheels.
